Although more rustic than what I wanted to work with this year, I still liked the idea. It appeared that the burlap had been glued onto plain chargers. I decided to give making my own a try.
To make chargers, you will need:
Plastic charger plates
A fabric of your choice
ModgePodge
Paintbrush
Very sharp scissors
A sharp Exacto knife or cutting tool
I began with this beautiful brocade fabric.
The reverse is gorgeous too, but I decided I liked the pattern where the gold was more prevalent, because I was making these for Christmas.
I had these inexpensive chargers on-hand that I knew I'd likely not use again without painting or upgrading them somehow. They are definitely showing their age!
I coated each charger plate generously with ModgePodge using a paintbrush to paint it on.
Gently press the fabric into the charger plate. Once the fabric is semi-dry, use scissors to cut away. When completely dry, use the Exacto to remove any frays.
*****Hindsight tip. It was not necessary to ModgePodge over the top of the fabric. Believe it or not, it caused the fabric not to adhere as well, and it also compromised the color.
All set!
To see these brocaded chargers featured in my 2015 Christmas tablescape, you may do so by visiting the post on my blog Parsimonious Décor Darling here. This project was easy, and you likely can use any fabric! I may even try tartan plaid for next year!
If you enjoy this post, please visit the archives! You may also visit my full profile to view my other blogs. Connect with me on my Facebook Page, Parsimonious Décor Darling. You might like to visit my other blog hubs,
The Marvelous Maison, a lifestyle blog hub and
Frugal Fab Fashionista, my fashion blog hub.
Follow me on Pinterest!! Please be sure to kindly follow the board guidelines, as it takes time and effort to find fabulous pins across the Internet and Pinterest! Thank you!
Thank you for stopping by! ❤